+421 444 398 347

vyroba@gremi.com

hranaté potrubie

Curves and elbows

Rectangular ducts

Ducts, offsets and reducers

Tees and branches

Curves and elbows

LIST OF PRODUCTS

CONTACT US

Curves and elbows

Catalogue
Declaration of Conformity

Flange design on rectangular ducts

  • Standard rectangular duct is delivered with flanges made of flange sheets and corners. Flange size is specified by the longer side of the section as follows:

Material

  • Standard duct materials include:
  • Galvanised sheet metal DX51D 275 MAC/NAC
  • Stainless steel AISI 304 (1.4301), AISI 304L (1.4307), AISI 316 (1.4401), AISI 316L (1.4404)

Rectangular 30°, 45°, 60°, 75°, 90° curve

OL A × B / α - R

  • A - cross section dimension
  • B - cross section dimension
  • α - curve angle [ ° ]
  • R - internal radius of curve

Length / wall thickness

  • < 800 / 0,6 mm
  • ≤ 1 500 / 0,8
  • > 1500 / 1,0 mm

Design

  • Crimped at flange joint.
  • Corrugated reinforcement standard on all ducts.
  • Leading plates are mounted as standard per to the table in the technical conditions.

Leading plates for rectangular and rectangular reducer curves

Dimension A1 is decisive instead of A for OLP reducer curves.
6_OLP A × B – A1 × B α - R_N1
6_OLP A × B – A1 × B α - R_N2
6_OLP A × B – A1 × B α - R_N3

Offset rectangular 90° curve

OLP A × B – A1 × B / α - R

  • A - first cross section dimension
  • B - cross section dimension
  • A1 - second cross section dimension
  • α - curve angle [ ° ]
  • R - internal radius of curve

Length / wall thickness

  • < 800 / 0,6 mm
  • ≤ 1 500 / 0,8
  • > 1500 / 1,0 mm

Design

  • Crimped at flange joint.
  • Corrugated reinforcement standard on all ducts.
  • Leading plates are mounted as standard per to the table in the technical conditions.

Leading plates for rectangular and rectangular reducer curves

Dimension A1 is decisive instead of A for OLP reducer curves.
6_OLP A × B – A1 × B α - R_N1
6_OLP A × B – A1 × B α - R_N2
6_OLP A × B – A1 × B α - R_N3

Roura čtverhranná s obloukem

RO A × B / 90° – L – R

  • A - cross section dimension
  • B - cross section dimension
  • L - length of straight section
  • α - curve angle [ ° ]
  • R - internal radius of curve

Length / wall thickness

  • < 800 / 0,6 mm
  • ≤ 1 500 / 0,8
  • > 1500 / 1,0 mm

Design

  • Crimped at flange joint.
  • Corrugated reinforcement standard on all ducts.
  • Leading plates are mounted as standard per to the table in the technical conditions.

Leading plates for rectangular and rectangular reducer curves

Dimension A1 is decisive instead of A for OLP reducer curves.
6_OLP A × B – A1 × B α - R_N1
6_OLP A × B – A1 × B α - R_N2
6_OLP A × B – A1 × B α - R_N3

Sharp elbow

KO A × B – R

  • A - cross section dimension
  • B - cross section dimension
  • R - internal radius of curve

Length / wall thickness

  • < 800 / 0,6 mm
  • ≤ 1 500 / 0,8
  • > 1500 / 1,0 mm

Design

  • Crimped at flange joint.
  • Corrugated reinforcement standard on all ducts.
  • Leading plates are mounted as standard per to the table in the technical conditions.

Leading plates for rectangular and rectangular reducer curves

Dimension A1 is decisive instead of A for OLP reducer curves.
6_OLP A × B – A1 × B α - R_N1
6_OLP A × B – A1 × B α - R_N2
6_OLP A × B – A1 × B α - R_N3

Sharp reducer elbow

KOP A × B – A1 × B – R

  • A - cross section dimension
  • B - cross section dimension
  • A1 - second cross section dimension
  • R - internal radius of elbow

Length / wall thickness

  • < 800 / 0,6 mm
  • ≤ 1 500 / 0,8
  • > 1500 / 1,0 mm

Design

  • Crimped at flange joint.
  • Corrugated reinforcement standard on all ducts.
  • Leading plates are mounted as standard per to the table in the technical conditions.

STAY CONNECTED

CONTACT DETAILS

Do not hesitate to contact us with all your specific ventilation duct production needs.

Copyright 2019 - GreMi KLIMA, s.r.o. - Manufacturing plant. Created by Studio Lukáš Chlebik
We reserve the right to change technical details and parameters. Errors and omissions cannot be completely ruled out.